SEI Marine

Mercury V6 Outboard Lower Unit 2.0, 2.4, and 2.5 Liter

$895.00

Mercury V6 Outboard Lower Unit 2.0, 2.4, 2.5 Liter

Mercury Outboard Lower unit replaces 2.0 liter, 2.4 liter, and 2.5 liter standard Mercury Lower units - This unit is 100% OEM Compatible, Requires no modifications, ships complete with water pump and upper drive shaft. The unit does not include oil!

 

Optional Kits

Mercury 2.0, 2.4, 2.5 Liter Install Kit $15

 

Mercury 2.0, 2.4, 2.5 Liter Anode Kit $39

 

Tips - To determine shaft length measure from the top of the water pump to the tip of the shaft, 20 inch shaft will measure 21 1/2 inches, a 25 inch shaft will measure roughly 27 inches.

Ratio Tips - You can count the teeth of the pinion gear (the smallest gear), if it has 14 teeth, it is a 2:1, if it has 15 teeth it is a 1:87.

Bullet Diameter - Measure the diameter of the round section in which the prop slides on. (Outside to Outside) it will measure either 4 3/4 or 4 1/4. If it is the smaller 4 1/4 you will need to replace you drive with a 1:87 and possibly re-prop.

Current stock: 0

Warranty:
3 Year fault free warranty
SKU:
SE-206
Condition:
New
Availability:
Typically ships in 24 hours
Shipping:
$0.00 (Fixed Shipping Cost)

17 Reviews

4/5
18th Jul 2017

Lower Unit - Great Price

You can see when you open the box that the quality is somewhat less than the OMC on the casting and finish. Once installed, it performed excellent and the internal components seem to be spot on with precision and quality. I would purchase again without hesitation.

5/5
31st May 2017

Merc lower unit

Great Product, very well packaged, shipping quick Can't wait to get in the lake again, Thanks

Add a Review